CraigG

My Feedback: (40)

There is a very extensive parts bag with three air valves, 3 air tanks, and numerous other air system and linkage parts which I will have to sort out. There is another bag loaded with small scale parts. There were no instructions with the kit but AVI has emailed me a manual with some very nice pictures of the servo locations/linkage and pictures of the full scale Fouga to help locate the scale parts.

It can see it's going to take me awhile to figure out my servo requiremens and how it will all go together. I'm taking it slow with this one but will post news/pics of my progress if there is any interest.

Craig

STEPHANE FRANCE

expected with great interest all information, good luck!
thank you CRAIG

DUCMOZ

Hi Craig, thank you for doing this. It make us that want one feel much more secure.

Behzad

STEPHANE FRANCE

hello,
does anyone have a list for the servos?
regards
stephane

CraigG

My Feedback: (40)

Stephane,

I'm working on that now. It looks like the control surface servo mounts are sized for a something similar to a JR DS8411 (L 39mm, W 19mm, H 34.5mm). I plan on using 7 of them with two for the ailerons, two for the elev/rudders, two for the flaps and one for nose wheel steering. Two smaller servos, such as JR DS3711's will be needed for the speed brakes. Additional small servos will be needed for the gear, doors and brake valves unless you go with electronic units.

There is an option to use two additional servos on the flaps with one for each of the 4 flap sections but I'm going to try and use just one servo per wing. I also plan to use all HV servos.

Hope this helps,

Craig

STEPHANE FRANCE

thank you very much CRAIG,
JR is perfect, I will be ordering 7 servos 8411., 2 servos 3711.
I actually put JETRONICS ...
regards
stéphane

STEPHANE FRANCE

hello,
I finally received the FOUGA, and I do not have documentation for installation, the cockpit is send later ...
can someone send me a PDF for construction?
best regards
stéphane

ambaron

Hello Stephan

Please send me your E mail and I will send you the PDF. Manual .

The Cockpit is sent seperate

Please conttact me at : [email protected]


Brg


Ambaron

ambaron

The Red Scheme Fouga presented by Ali Machinchy ( Video taken by Scott from SKS ):

https://www.youtube.com/watch?v=lxmYQcRkpTM

Enjoy

STEPHANE FRANCE

hello,
I got the PDF by ambaron installation can begin ...
regards
stephane

CraigG

My Feedback: (40)

Stephane,

Please update us as you assemble your Fouga....any suggestions, issues, etc. I have been delayed getting mine started but hope to begin in a couple of months.

Thanks,

Craig

lavi rider

My Feedback: (6)

Hello all ,

Here is the servo list 4 the Fouga .
Elv DS9411 or equivalent
Ail DS 9411
Flp. DS 8411
Nose steer DS8411
Spd Brk DS 3421

STEPHANE FRANCE

hello, some pictures of the mounting
regards
stephane

lama88

hello,
Beautiful job Stephane, hope to see it in fly soon !
Where is built this Kit, China or Israel ??
i would like to install Electron retract with electric brake, seem more easy for a jet beginner like me !!
i 'm waiitng some reply from Avi before to take my decision, christmas is coming ......
Best rgds
Olivier

STEPHANE FRANCE

hello OLIVIER,
I answered you on KEROSTART private message.
I gives you my email [email protected]
regards
stephane

lama88

Stephane,
i do not received mail from you in Kerostart or in my personnal mailbox
Have a nice day
Olivier

STEPHANE FRANCE

hello ,
construction ahead ....
https://www.youtube.com/watch?v=qCOllZ-IT0w https://www.youtube.com/watch?v=kEONn-x-Xqc https://www.youtube.com/watch?v=qzs9exAy6-E&feature=em-upload_owner regards
stephane

STEPHANE FRANCE

hello AMBARON,
can you please tell me what flap horn, I believe that missing parts, have a photo?
thank you.
regards
stef

lavi rider

My Feedback: (6)

You are probably right . the flap horns should be straight polyply pieces at about an inch long .Same thickness as the horn shown in your picture.

igoren

My Feedback: (23)

I made my own , frome the same horn, jut cut them to fit.

STEPHANE FRANCE

we will manufacture the parts, it will go faster ...

lavi rider

My Feedback: (6)

Wouldn't it be easier to contact the supplier and ask for the parts?

STEPHANE FRANCE

of course it's easier AVI but did not respond to messages for 15 days, that's why we ask the question on the forum ...

ambaron

Hi Stephane

I looks very nice

This Holes are for Flaps Horns

You can find Details in the Manual I sent you before under the Flaps Section

You need to use the Horn as you wish According to scale Movement you wish to have .

If you need , I can send the Manual Again ( It shows the Horns in the Package and how to use it )

Avi

igoren

My Feedback: (23)

can i get the manual too, please send it to [email protected],
thanks
isaac