Maxford USA 60 to 90 size Floats Fiberglass Floats V2
#1
Thread Starter
Join Date: Feb 2006
Location: Livermore , CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Maxford USA 60 to 90 size Floats Fiberglass Floats V2
Maxford USA 60 to 90 size Floats Fiberglass Floats V2
Length: 38 in
Wide: 5 in
Two (2) Water rudders : 1) Maxfords Rudder
2) Ernst #155
Weight: 26 oz (2 floats), 37 oz with installation gear and water rudder
Loading: good for 60~90 size plane
Buyer pays shipping
Shipping information to calculate cost prior to bidding
12.5" x 6" x 40 "
Weight 5 lb 12.5 oz
From zip Code 94550
Consult Maxfords USA for more information
Length: 38 in
Wide: 5 in
Two (2) Water rudders : 1) Maxfords Rudder
2) Ernst #155
Weight: 26 oz (2 floats), 37 oz with installation gear and water rudder
Loading: good for 60~90 size plane
Buyer pays shipping
Shipping information to calculate cost prior to bidding
12.5" x 6" x 40 "
Weight 5 lb 12.5 oz
From zip Code 94550
Consult Maxfords USA for more information
Last edited by goehrle; 07-10-2019 at 02:22 PM.
#11
Thread Starter
Join Date: Feb 2006
Location: Livermore , CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Just like my ad says: it comes with the Maxford rudder hardware.
If you want to use PayPal then the price will increase what they charge. I prefer a postal money order, they are much cheaper
Remember: You pay shipping. I have given sufficient information for you to calculate that cost, If you have not done this
I suggest you do as that is an adder to the price posted.
So to proceed
1. determine if you really want to use PayPal.
2 get your own estimate for shipping. If you are still interested send me a copy of the shipping quote and I will validate from here
and add that plus the PayPal fee if you still want to use. them
3 I will then tell you what your final cost will be:
If you want to use PayPal then the price will increase what they charge. I prefer a postal money order, they are much cheaper
Remember: You pay shipping. I have given sufficient information for you to calculate that cost, If you have not done this
I suggest you do as that is an adder to the price posted.
So to proceed
1. determine if you really want to use PayPal.
2 get your own estimate for shipping. If you are still interested send me a copy of the shipping quote and I will validate from here
and add that plus the PayPal fee if you still want to use. them
3 I will then tell you what your final cost will be:
#12
Floats
i don’t have any problem with sending money order I will try to check on shiping charge tomorrow —you said the floats are 38 inch max ford USA sayes they are 40 inch just checking they have to be 40 inch can’t use 38 inch
#13
Thread Starter
Join Date: Feb 2006
Location: Livermore , CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Have you read my ad and the web information at Maxford USA, They are both 38 inches-tip to stern
If you REALLY need 40" then buy them from Maxford but get it in writing that they are 40 in--tip to stern.
From my investigation they have no 40" floats on their website.
they maybe including the added length of the rudder. This does not make them 40" floats.
Good luck
If you REALLY need 40" then buy them from Maxford but get it in writing that they are 40 in--tip to stern.
From my investigation they have no 40" floats on their website.
they maybe including the added length of the rudder. This does not make them 40" floats.
Good luck
#15
Gary postal $66.65 ups more than that i'm just going to order a set of 42 inch foam floats and sheet them from sea plane supply for $44.00 i already have the sheeting and supplys and gear here you were asking a great price those floats are sellng now from maxford usa for $99.00 wish i could have used your 38 inch ones i will pass your post along to the guys in my club good luck with your sale ( bobby )